Brother International HL-2400C Service Manual - Page 159

48 EACH IMAGE SET This mode can reset the number of total pages of each color in the NVRAM whenever NVRAM INITIAL is executed or the MCTL PCB is replaced. Note: Do not perform this mode other than when replacing the MCTL PCB. Description of Procedures 1) Press the Continue button after selecting Screen (a) "EACH IMAGE SET". (a) → (b) 2) Select the desired color to reset in EACH IMAGE SET. (b) → (c) 3) Use the Set or w button to select the desired digit. Use the Continue button to input values to the selected (blinking) digit. Upon completing the input of the values, use the Set or w button to select SET on the LCD and then press the select button to store the set value. (c) → (d) 4) Press the Font button to exit the EACH IMAGE SET mode. LCD Message 39 FACTORY MODE a) EACH IMAGE SET 48 IMAGE OF b) Y/M/C/K 48 IMAGE OF C c) 005432 P SET d) 48 IMAGE OF Y/M/C/K 39 FACTORY MODE e) DP CHECK V-38