Brother International HL-2400C Service Manual - Page 428
Format Card, Card 1, Card 2, Execute Data, Card List, Delete
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
USER'S GUIDE 4-34 If CARD is selected, Display Message FORMAT CARD exit Card Operation Format a new flash memory card or HDD card. Exit to CARD OPERATION When the display shows "FORMAT CARD," press the Set button to format the installed card. After the printer finishes formatting the card, you must exit to the "CARD OPERATION" menu. Notes When the card is formatted, data that has been previously written is erased. It takes ten or more seconds to format a 2-Mbyte flash memory card or HDD card. The larger the capacity of the card, the longer time it takes to format the card. When the installed flash memory card or HDD card is formatted: When you enter this mode menu with a formatted flash memory card or HDD card installed, the display shows the following menus: Display Message CARD 1 CARD 2 Card Operation Select Card 1. Select Card 2. After you have selected the card, the display shows the following messages: Display Message EXECUTE DATA CARD LIST SAVE DELETE Flash Operation Select the data ID and execute the selected data. This menu appears only when data has been saved on the card. Print out the contents of the flash memory card or the HDD card. This menu appears only when anything has been saved in the card. Save received data, macros, and fonts. Delete items from the card.