Brother International HL-2400C Service Manual - Page 375
Lj Ready 001p T1
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 375 highlights
CHAPTER 2 SETTING UP THE PRINTER ! Caution Always wait at least 5 seconds after turning off the power before turning it back on. Do not turn the power off while the printer is printing as this may cause a paper jam and adversely affect the printer. The printer performs a self-diagnosis at start-up to check its hardware and software. If the printer should find any problems, the display will change to show the corresponding error message. See "TROUBLESHOOTING" in Chapter 6. The display shows several messages quickly at start-up. If the printer detects no errors, it automatically goes on-line and the message changes to show the current printer status and settings as shown below. LJ READY 001P T1 AUTO K C MY AUTO: LJ : READY : 001 : P : T1 : : The auto emulation selection mode is set. The auto emulation selection is set and currently the HP PCL5C emulation is selected. The printer is ready to print. The number of copies to print is set to 1. Portrait print is selected. Paper is fed from Tray1. Toner cartridges are full. When the toner cartridges become nearly empty, the indication blinks. The indication disappears when a color toner is empty. 2-17