Brother International HL-2400C Service Manual - Page 379

CHAPTER 2 SETTING UP THE PRINTER Prepare Windows 3.1/3.11 for the Printer 1. Insert the supplied disk for Windows into your floppy disk drive. 2. Choose Run from the File menu in the Program Manager. 3. Type the drive name where you inserted the supplied disk and "SETUP" in the box: for example, A:\SETUP. Choose the OK button or press the Enter key. 4. The installer starts running. Follow the instructions on the computer screen.  Notes
The installer automatically updates your SYSTEM.INI Windows file by adding DEVICE=bi-di.386 under the [386Enh] section. If any bidirectional parallel communications device driver has previously been installed, it will be deactivated by this new driver. If you want to use the driver that was previously installed, you should re-install your previous driver. However, re-installing the previous driver will make the HL-2400C driver inactive.
The installer makes the installed printer driver the Windows default.
The installer automatically sets the printer port to the parallel interface, LPT1.
During this installation, changes have been made to the SYSTEM.INI file. It is necessary to restart Windows so that the changes become effective and the installed bi-directional parallel communications device driver can take effect. 2-21