Brother International HL-2400C Service Manual - Page 424

USER'S GUIDE  Note Even if you set the resolution to 600 dpi in this mode, the printer may not be able to print large and complex full color files at 600 dpi because of insufficient memory. However, it automatically decreases the resolution to 300 dpi to print them. While the printer is printing in  this mode, the display prompts "01 PR300 ... ." If the printer cannot print files even at 300 dpi, a "MEMORY FULL"  error occurs. See "TROUBLESHOOTING" in Chapter 6. This automatic resolution decrease function works with the page  protection on. See also "PAGE PROTECTION" in this chapter. When you want to print large and complex full color data without decreasing the resolution, you should expand the memory capacity of the printer to 24-Mbytes or more. s CAPT Setting When you select "CAPT SETTING," you can use the Color Advanced Photoscale Technology (CAPT). This function offers photographic fine colour on graphics. CAPT setting is available only in BR-Script 2 mode and it requires 24 MB of RAM to enjoy CAPTs large and complex full color printouts. When you set CAPT=ON, the high resolution control (HRC) setting is unavailable. Display Message CAPT =ON CAPT =OFF Advanced Photoscale Technology Colour advanced photoscale technology is effective. Cancel the colour advanced photoscale technology. (factory setting)  Note In the PCL 5C mode, CAPT setting is always ON. It depends on the printer setting if the printer uses the function or not. 4-30