Brother International HL-2400C Service Manual - Page 216

4.2.2 Panel PCB (including LCD) 1) Remove the set screw BT4X10 (1 pc.) from the panel case assembly and disconnect the connector. (Refer to Figure 7-26 below.) 2) Remove the set screws BT3X8 (4 pcs.) from the panel PCB and remove the panel shield plate, PCB and LCD from the panel case assembly. Panel Case Assembly Panel case Panel top cover LCD PCB Panel PCB Panel shield plate Connector Control Panel Disconnect the connector Fig.7-26 4.2.3 Side Cover (L) 1) Remove the set screw BT4X8 (2 pcs.) of side cover (L). 2) Remove the side cover (L). (Slowly pull up the side cover (L), and release the hook from the front of the Upper cover.) Hook Cover (L) Fig.7-27 VII-18