Brother International HL-2400C Service Manual - Page 441
FONT Button
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
CHAPTER 4 CONTROL PANEL FONT Button Pressing the Font button allows you to select fonts and symbol/character sets. Notes When you use the Font button, note the following: The Font button is effective in the HP PCL5C, EPSON FX-850, and IBM Proprinter XL modes. However the settings are subject to the current emulation mode. Note that the Font button does not work in the BR-Script 2 mode. If the application software supports font and symbol/character set selection, you do not need to set them with the Font button. The software or command setting overrides the button setting. If you want to use optional fonts other than the printer's resident fonts, be sure to install a font cartridge/card that has your desired fonts. The printer automatically selects the font that has exactly the same or similar characteristics as those you set through the software or with a command. If the installed font cartridge/card happens to have a font of similar characteristics, the printer will print with an unexpected font. You can store the fonts you require on a flash memory card or HDD card only in the HP PCL5C mode or BR-Script 2 mode when one is installed. See "CARD OPERATION." Setting the Font and Symbol Set in the HP PCL5C Mode When the HP PCL5C emulation mode has been selected, the font and symbol set can be set separately as the primary or secondary font. When the primary font is selected; Message on the lower row SELECT FONT P SYMBOL SET P TABLE PRINT P to do; Set the primary font Set the symbol set Print the code table When the secondary font is selected; Message on the lower row SELECT FONT S SYMBOL SET S TABLE PRINT S to do; Set the secondary font Set the symbol set Print the code table 4-47