Brother International HL-2400C Service Manual - Page 328
To Install The Printer Correctly
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
PR99010 8. TO INSTALL THE PRINTER CORRECTLY Please read the installation steps described below carefully. If the printer is not installed correctly, image failures may occur or the life expectancy of the OPC belt cartridge may be shortened. 1) Turn ON the power switch of the printer. 2) After the printer has initialized, open the front cover and then the top cover of the printer and pull up the OPC belt cartridge from the printer. OPC Belt Cartridge 3) Measure the gap on the OPC belt cartridge shown in the figure below. If the gap is in the range of 5 ± 2 mm, the printer is installed correctly. 5 ± 2 mm A-17
A-17
8.
TO INSTALL THE PRINTER CORRECTLY
Please read the installation steps described below carefully.
If the printer is not installed correctly, image failures may occur or the life expectancy of
the OPC belt cartridge may be shortened.
1)
Turn ON the power switch of the printer.
2)
After the printer has initialized, open the front cover and then the top cover of the
printer and pull up the OPC belt cartridge from the printer.
3)
Measure the gap on the OPC belt cartridge shown in the figure below.
If the gap is
in the range of 5 ± 2 mm, the printer is installed correctly.
PR99010
OPC Belt Cartridge
5 ± 2 mm