Brother International HL-2400C Service Manual - Page 251
No Tray Upp/low
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Display Message 44 SIMM ERROR 45 MIO ERROR 47 CARD1(2)R ERROR XX SIZE ERROR IGNORE DATA Meaning Countermeasure Incorrect installation of SIMMs Install SIMMs correctly, referring to the printed error message. Error in communication with the MIO card Install the MIO card correctly. Card read error Use a new card. If the same error occurs, consult your dealer or service personnel. Paper of incorrect size is loaded into XX. XX Set the correct size of paper is T1/2. in T1/2. Data is ignored because of an error in the PostScript language program. Press the Reset button. If the same error occurs, you may need to add optional SIMM memory. 2.2 Engine Controller Mode The Ready LED is lit, and applicable messages appear on the liquid crystal display (LCD) in the following cases; 1) Consumables require to be replenished. 2) Waste toner pack is full of waste toner. 3) Paper jam. 4) Periodic maintenance. 5) Maintenance work being incomplete. The above cases are not regarded as a breakdown, and should be treated in accordance with Table 8-2; Table 8-2 Display Message 11 NO MEDIA UPP/LOW 11 CHK MEDIA UPP/LOW Meaning No paper in the upper cassette / lower cassette Inconsistency of media 12 NO TRAY UPP/LOW No upper / lower media cassette 13 REPLACE TONER Y/M/C/K Toner (Y, M, C, K) empty 14 CHECK WASTE TONER Waste toner pack full of toner 14 CHECK FUSER OIL Change the oil bottle Countermeasure Replenish paper. Change media. Install cassette(s). Replace with new toner cartridge(s). Replace with a new waste toner pack. Replace with a new oil bottle. VIII-6