Brother International HL-2400C Service Manual - Page 140
Service Mode, Test Print, Next Care Info, Factory Mode
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
3.3 Service Mode Service mode is a unique mode for the maintenance of the printer only, without the video controller card. In this mode, you can check the operation status of the printer engine Offline and also carry out maintenance work for each of the printer components. Procedure 1) Hold down the Mode, Set and w buttons and turn the printer Power on. 2) Using the Font, Continue, Set and w buttons, select the mode necessary for the maintenance work from the test list shown in Table 5-2. How to designate the necessary mode 1) Press the Set or w button so that service modes (a), (b) and (c) show up in sequence to be selected. 2) After selecting the desired mode, execute the selected mode by pressing the Continue button. 3) Press the Font button to exit the mode. (a) SERVICE MODE TEST PRINT SERVICE MODE (b) NEXT CARE INFO SERVICE MODE (c) FACTORY MODE V-19