Brother International HL-2400C Service Manual - Page 175

1.2.5 Cleaning the Paper Discharger The paper discharger should be cleaned according to the periodic maintenance cleaning cycle set out in Table 6-3. 1) Cotton cloth (2 ∼ 3 pieces) 2) Cotton swab (2 ∼ 3 pieces) 1) Turn off the power supply, and unplug the power cable. 2) Open the transfer unit. 3) Remove the paper discharger unit. (Fig.6-5) Paper Discharger Transfer Unit 4) Clean the discharger case housing with a cotton cloth. 5) Clean the corona wire and the inside of the charger case with a cotton swab. (Fig.6-6) 6) Re-install the charger unit into the transfer unit. Fig.6-5 Cotton swab Vinyl String Fig.6-6 Corona Wire CAUTION • Do not break the vinyl string on top of the case when cleaning the discharger unit. • Do not break the corona wire. VI-10