Brother International HL-2400C Service Manual - Page 434

USER'S GUIDE 4-40 You can check the fonts saved on the card by printing the list of fonts with the Test button. See "TEST Button" in Chapter 4.  Note When the fonts on the HDD card are selected in a print job, they are copied into the printer RAM. It may cause a printer memory full error because those fonts occupy some RAM space. It is recommended to install optional SIMM memory to use the downloaded fonts on the HDD card. s Delete When you select "DELETE" and press the Set button, you can enter the following sub-setting menus to delete macros and fonts or format the installed flash memory card or HDD card: Display Message MACRO ID=##### DATA ID=##### FONT ID=##### FORMAT CARD Delete Menu Delete the selected ID macro. Delete the selected ID data. Delete the selected ID font. Format the flash memory card or HDD card. • Macro When you press the Set button at "MACRO ID=#####," the cursor moves to the ID number. The printer prompts you to select the ID number of the macro to be deleted. Select the ID number with the v or w button and press the Set button, so that the printer deletes the selected macro. • Data When you press the Set button at "DATA ID=#####," the cursor moves to the ID number. The printer prompts you to select the ID number of the data to be deleted. Select the ID number with the v or w button and press the Set button, so that the printer deletes the selected data. • Font When you press the Set button at "FONT ID=#####," the cursor moves to the ID number. The printer prompts you to select the ID number of the font to be deleted. Select the ID number with the v or w button and press the Set button, so that the printer deletes the selected font.