Brother International HL-2400C Service Manual - Page 469
TEST Button
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 469 highlights
CHAPTER 4 CONTROL PANEL TEST Button You can test the printer or print out the list of fonts with the Test button. To do so, hold down the Shift button and press the Test button. You will then enter test mode where you may test the printer or print out the list of fonts. To test the printer, follow these steps: 1. Press the Sel button to set the printer off-line. 2. Hold down the Shift button and press the Test button. When you enter test mode, the display shows the first test mode item. 3. Press the v or w button until the desired test mode appears on the display. Display Message DEMO PAGE TEST PRINT PRINT CONFIG PRINT FONTS I PRINT FONTS C PRINT FONTS P exit Test Mode Prints out the demonstration. Performs the printer test and prints out the test pattern. Prints out the list of panel button settings you have configured for the printer as user settings. Prints out the list of internal or resident fonts. Prints out the list of optional fonts stored in the font cartridge/card. Prints out the list of permanent download fonts. Exits from the test mode. The printer does not perform the test. 4-75