Cisco SR224T Administration Guide - Page 110
Setting Port LACP Parameter Settings, Port Management, Configuring LACP, Setting
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Port Management Configuring Link Aggregation 9 Setting Port LACP Parameter Settings The LACP page displays and enables configuration of the LACP System Priority, LACP timeout, and LACP port priority. LACP timeout is a per port parameter, and is the time interval between the sending and receiving of consecutive LACP PDUs. With all factors equal, when the LAG is configured with more candidate ports than the maximum number of active ports allowed, the switch selects ports as active from the dynamic LAG that has the highest priority NOTE The LACP setting is irrelevant on ports that are not members of a dynamic LAG. To define the LACP settings: STEP 1 Click Port Management > Link Aggregation > LACP. The LACP page opens. STEP 2 Enter the LACP System Priority. See Configuring LACP. STEP 3 Select a port, and click Edit. The Edit LACP page opens. STEP 4 Enter the values for the following fields: • Interface-Select the port number to which timeout and priority values are assigned. • LACP Port Priority-Enter the LACP priority value for the port. See Setting Port LACP Parameter Settings. • LACP Timeout-Select the periodic transmissions of LACP PDUs, which occur at either a long or short transmission speed, depending upon the expressed LACP timeout preference. STEP 5 Click Apply. The Running Configuration file is updated. Cisco Small Business 200 Series Smart Switch Administration Guide 111