Cisco SR224T Administration Guide - Page 132
Smartport Properties, Auto Smartport Device Detection Method
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Smartports Configuring Smartport Using The Web-based Interface 10 Smartport Properties To configure the Smartport feature globally: STEP 1 Click Smartport > Properties. The Properties Page opens. STEP 2 Enter the parameters. • Administrative Auto Smartport-Select to globally enable or disable Auto Smartport. The following options are available: - Disable-Select to disable Auto Smartport on the device. - Enable-Select to enable Auto Smartport on the device. - Enable by Auto Voice VLAN-This enables Auto Smartport, but puts it in operation only when Auto Voice VLAN is also enabled and in operation. Enable by Auto Voice VLAN is the default. • Auto Smartport Device Detection Method-Select whether incoming CDP, LLDP, or both types of packets are used to detect the Smartport type of the attaching device(s). At least one must be checked in order for Auto Smartport to identify devices. • Operational CDP Status-Displays the operational status of CDP. Enable CDP if Auto Smartport is to detect the Smartport type based on CDP advertisement. • Operational LLDP Status-Displays the operational status of LLDP. Enable LLDP if Auto Smartport is to detect the Smartport type based on LLDP/ LLDP-MED advertisement. • Auto Smartport Device Detection-Select each type of device for which Auto Smartport can assign Smartport types to interfaces. If unchecked, Auto Smartport does not assign that Smartport type to any interface. STEP 3 Click Apply. This sets the global Smartport parameters on the switch. Cisco Small Business 200 Series Smart Switch Administration Guide 133