Cisco SR224T Administration Guide - Page 200
MLD Snooping, Operational Last Member Query Counter
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Configuring Multicast Forwarding MLD Snooping 15 • Operational Query Robustness-Displays the robustness variable sent by the elected querier. • Query Interval-Enter the interval between the General Queries to be used if this switch is the elected querier. • Operational Query Interval-The time interval in seconds between General Queries sent by the elected querier. • Query Max Response Interval-Enter the delay used to calculate the Maximum Response Code inserted into the periodic General Queries. • Operational Query Max Response Interval-Displays the Query Max Response Interval included in the General Queries sent by the elected querier. • Last Member Query Counter-Enter the number of IGMP Group-Specific Queries sent before the switch assumes there are no more members for the group, if the switch is the elected querier. • Operational Last Member Query Counter-Displays the operational value of the Last Member Query Counter. • Last Member Query Interval-Enter the Maximum Response Delay to be used if the switch cannot read Max Response Time value from groupspecific queries sent by the elected querier. • Operational Last Member Query Interval-Displays the Last Member Query Interval sent by the elected querier. • Immediate Leave-Enable Immediate Leave to decrease the time it takes to block a Multicast stream sent to a member port when an IGMP Group Leave message is received on that port. STEP 5 Click Apply. The Running Configuration file is updated. MLD Snooping Hosts use the MLD protocol to report their participation in Multicast sessions, and the switch uses MLD snooping to build Multicast membership lists. It uses these lists to forward Multicast packets only to switch ports where there are host nodes that are members of the Multicast groups. The switch does not support MLD Querier. Cisco Small Business 200 Series Smart Switch Administration Guide 201