Cisco SR224T Administration Guide - Page 76
Administration, Discovery - LLDP, LLDP MED Network Policy., Apply, Network Policy Number
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Configuring Discovery Configuring LLDP 8 Setting LLDP MED Network Policy An LLDP-MED network policy is a related set of configuration settings for a specific real-time application such as voice, or video. A network policy, if configured, can be included in the outgoing LLDP packets to the attached LLDP media endpoint device. The media endpoint device must send its traffic as specified in the network policy it receives. For example, a policy can be created for VoIP traffic that instructs VoIP phone to: • Send voice traffic on VLAN 10 as tagged packet and with 802.1p priority 5. • Send voice traffic with DSCP 46. Network policies are associated with ports by using the LLDP MED Port Settings page. An administrator can manually configure one or more network policies and the interfaces where the policies are to be sent. It is the administrator's responsibility to manually create the VLANs and their port memberships according to the network policies and their associated interfaces. In addition, an administrator can instruct the switch to automatically generate and advertise a network policy for voice application based on the voice VLAN maintained by the switch. Refer the Auto Voice VLAN section for details on how the switch maintains its voice VLAN. To define an LLDP MED network policy: STEP 1 Click Administration > Discovery - LLDP > LLDP MED Network Policy. The LLDP MED Network Policy page opens. This page displays previously-created network policies. STEP 2 Select Auto for LLDP-MED Network Policy for Voice Application if the switch is to automatically generate and advertise a network policy for voice application based on the voice VLAN maintained by the switch. NOTE When this box is checked, you may not manually configure a voice network policy. STEP 3 Click Apply to add this setting to the Running Configuration file. STEP 4 To define a new policy, click Add and the Add LLDP MED Network Policy page opens. STEP 5 Enter the values: • Network Policy Number-Select the number of the policy to be created. Cisco Small Business 200 Series Smart Switch Administration Guide 77