Cisco SR224T Administration Guide - Page 93

Configuring Discovery Configuring CDP 8 • Interface-IF User Defined was selected for Source Interface, select the interface. • Syslog Voice VLAN Mismatch-Check to send a SYSLOG message when a voice VLAN mismatch is detected. This means that the voice VLAN information in the incoming frame does not match what the local device is advertising. • Syslog Native VLAN Mismatch-Check to send a SYSLOG message when a native VLAN mismatch is detected. This means that the native VLAN information in the incoming frame does not match what the local device is advertising. • Syslog Duplex Mismatch-Check to send a SYSLOG message when duplex information is mismatched. This means that the duplex information in the incoming frame does not match what the local device is advertising. STEP 3 Click Apply. The LLDP properties are defined. Editing CDP Interface Settings Use the Interface Settings page to activate LLDP and remote log server notification per port, and to select the TLVs included in LLDP PDUs. By setting these properties it is possible to select the types of information to be provided to devices that support the LLDP protocol. The LLDP-MED TLVs to be advertised can be selected in the LLDP MED Interface Settings page. To define the LLDP interface settings: STEP 1 Click Administration > Discovery - CDP > Interface Settings. The Interface Settings page opens. This page displays the following CDP information for each interface. • CDP Status-CDP publishing option for the port. • Reporting Conflicts with CDP Neighbors-Displays the status of the reporting options that are enabled/disabled in the Edit page (Voice VLAN/ Native VLAN/Duplex). • No. of Neighbors-Number of neighbors detected. Cisco Small Business 200 Series Smart Switch Administration Guide 94