Cisco SR224T Administration Guide - Page 56

System Time Configuring System Time 6 - Week-Week within the month from which DST begins every year. - Month-Month of the year in which DST begins every year. - Time-The time at which DST begins every year. • To-Date when DST ends each year. For example, DST ends locally every fourth Friday in October at 5:00 am. The parameters are: - Day-Day of the week on which DST ends every year. - Week-Week within the month from which DST ends every year. - Month-Month of the year in which DST ends every year. - Time-The time at which DST ends every year. STEP 3 Click Apply. The system time values are written to the Running Configuration file. Adding a Unicast SNTP Server Up to eight Unicast SNTP servers can be configured. NOTE To specify a Unicast SNTP server by name, you must first configure DNS server(s) on the switch (see the Defining DNS Servers section). In order to add a Unicast SNTP server, check the box to enable SNTP Client Unicast. To add a Unicast SNTP server: STEP 1 Click Administration > Time Settings > SNTP Unicast. The SNTP Unicast page opens. This page displays the following information for each Unicast SNTP server: • SNTP Server-SNTP server IP address. Up to eight SNTP servers can be defined. The preferred server, or hostname, is chosen according to its stratum level. • Poll Interval-Displays whether polling is enabled or disabled. • Authentication Key ID-Key Identification used to communicate between the SNTP server and switch. • Stratum Level-Distance from the reference clock expressed as a numerical value. An SNTP server cannot be the primary server (stratum level 1) unless polling interval is enabled. Cisco Small Business 200 Series Smart Switch Administration Guide 57