Cisco SR224T Administration Guide - Page 163
Configuring VLAN Membership, Apply, VLAN Management, Port VLAN Membership, Interface
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
VLAN Management Defining VLAN Membership 12 • PVID-Select to set the PVID of the interface to the VID of the VLAN. PVID is a per-port setting. STEP 4 Click Apply. The interfaces are assigned to the VLAN, and written to the Running Configuration file. You can continue to display and/or configure port membership of another VLAN by selecting another VLAN ID. Configuring VLAN Membership The Port VLAN Membership page displays all ports on the device along with a list of VLANs to which each port belongs. If the port-based authentication method for an interface is 802.1x and the Administrative Port Control is Auto, then: • Until the port is authenticated, it is excluded from all VLANs, except guest and unauthenticated ones. In the VLAN to Port page, the port is marked with "P". • When the port is authenticated, it receives membership in the VLAN in which it was configured. To assign a port to one or more VLANs: STEP 1 Click VLAN Management > Port VLAN Membership. The Port VLAN Membership page is displayed. STEP 2 Select interface type (Port or LAG), and click Go. The following fields are displayed for all interfaces of the selected type: • Interface-Port/LAG ID. • Mode-Interface VLAN mode that was selected in the Interface Settings page. • Administrative VLANs-Drop-down list that displays all VLANs of which the interface might be a member. • Operational VLANs-Drop-down list that displays all VLANs of which the interface is currently a member. • LAG-If interface selected is Port, displays the LAG in which it is a member. STEP 3 Select a port, and click the Join VLAN button. The Join VLAN page is displayed. Cisco Small Business 200 Series Smart Switch Administration Guide 164