Cisco SR224T Administration Guide - Page 177

VLAN Management Voice VLAN 12 Adding Interfaces to Voice VLAN on Basis of OUIs The QoS attributes can be assigned per port to the voice packets in one of the following modes: • All-Quality of Service (QoS) values configured to the Voice VLAN are applied to all of the incoming frames that are received on the interface and are classified to the Voice VLAN. • Telephony Source MAC Address (SRC)-The QoS values configured for the Voice VLAN are applied to any incoming frame that is classified to the Voice VLAN and contains an OUI in the source MAC address that matches a configured telephony OUI. Use the Telephony OUI Interface page to add an interface to the voice VLAN on the basis of the OUI identifier and to configure the OUI QoS mode of voice VLAN. To configure Telephony OUI on an interface: STEP 1 Click VLAN Management > Voice VLAN > Telephony OUI Interface. The Telephony OUI Interface page is displayed. The Telephony OUI Interface page displays voice VLAN OUI parameters for all interfaces. STEP 2 To configure an interface to be a candidate port of the telephony OUI-based voice VLAN, click Edit. The Edit Interface Settings page is displayed. STEP 3 Enter the values for the following fields: • Interface-Select an interface. • Telephony OUI VLAN Membership-If enabled, the interface is a candidate port of the telephony OUI based voice VLAN. When packets that match one of the configured telephony OUI are received, the port is added to the voice VLAN. • Voice VLAN QoS Mode-Select one of the following options: - All-QoS attributes are applied on all packets that are classified to the Voice VLAN. - Telephony Source MAC Address-QoS attributes are applied only on packets from IP phones. STEP 4 Click Apply. The OUI is added. Cisco Small Business 200 Series Smart Switch Administration Guide 178