Cisco SR224T Administration Guide - Page 73

Configuring Discovery Configuring LLDP 8 STEP 3 In the Fast Start Repeat Count field, enter the number of times LLDP packets are sent when the LLDP-MED Fast Start mechanism is initialized. This occurs when a new endpoint device links to the switch. For a description of LLDP MED, refer to the LLDP MED Network Policy section. STEP 4 Click Apply. The LLDP properties are added to the Running Configuration file. Editing LLDP Port Settings Use the Port Settings page to activate LLDP and remote log server notification per port, and to select the TLVs included in LLDP PDUs. The LLDP-MED TLVs to be advertised can be selected in the LLDP MED Port Settings page, and the management address TLV of the switch may be configured. To define the LLDP port settings: STEP 1 Click Administration > Discovery - LLDP > Port Settings. The Port Settings page opens. This page displays the port LLDP information. STEP 2 Select a port and click Edit. The Edit LLDP Port Settings page opens. This page provides the following fields: • Interface-Select the port to edit. • Administrative Status-Select the LLDP publishing option for the port. The values are: - Tx Only-Publishes but does not discover. - Rx Only-Discovers but does not publish. - Tx & Rx-Publishes and discovers. - Disable-Indicates that LLDP is disabled on the port. • System Log Notification-Select Enable to notify notification recipients that there has been a topology change. The time interval between notifications is entered in the Topology Change System Log Notification Interval field in the LLDP Properties page. Cisco Small Business 200 Series Smart Switch Administration Guide 74