Cisco SR224T Administration Guide - Page 223
IPv6 Address Type, Link Local Interface, Host Name, IP Address, Apply, Link Local, Global
![]() |
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Configuring IP Information Domain Name Systems 16 • IPv6 Address Type-Select the IPv6 address type (if IPv6 is used). The options are: - Link Local-The IPv6 address uniquely identifies hosts on a single network link. A link local address has a prefix of FE80, is not routable, and can be used for communication only on the local network. Only one link local address is supported. If a link local address exists on the interface, this entry replaces the address in the configuration. - Global-The IPv6 address is a global Unicast IPV6 type that is visible and reachable from other networks. • Link Local Interface-If the IPv6 address type is Link Local, select whether it is received through VLAN2 or ISATAP. • Host Name-Enter a domain name, up to 158 characters. • IP Address-Enter an IPv4 address or enter up to four IPv6 host addresses. Addresses 2-4 are backup addresses. STEP 4 Click Apply. The DNS host is written to the Running Configuration file. Cisco Small Business 200 Series Smart Switch Administration Guide 224
![](/manual_guide/products/cisco-sr224t-administration-guide-6b1cd67/223.png)