Cisco SR224T Administration Guide - Page 133

Smartports Configuring Smartport Using The Web-based Interface 10 Smartport Type Settings Use the Smartport Type Settings page to edit the Smartport Type settings and view the Macro Source. By default, each Smartport type is associated with a pair of built-in Smartport macros. See Smartport Types for further information on macro versus anti-macro. Built-in or user-defined macros can have parameters. The built-in macros have up to three parameters. Editing these parameters for the Smartport types applied by Auto Smartport from the Smartport Type Settings page configures the default values for these parameters. These defaults are used by Auto Smartport. NOTE Changes to Auto Smartport types cause the new settings to be applied to interfaces which have already been assigned that type by Auto Smartport. In this case, binding an invalid macro or setting an invalid default parameter value causes all ports of this Smartport type to become unknown. STEP 1 Click Smartport > Smartport Type Settings. The Smartport Type Settings page opens. STEP 2 To view the Smartport macro associated with a Smartport type, select a Smartport type and click View Macro Source. STEP 3 To modify the parameters of a macro, select a Smartport type and click Edit. The Edit Smartport Type Settings page opens. STEP 4 Enter the fields. • Port Type-Select a Smartport type. • Macro Name-Displays the name of the Smartport macro currently associated with the Smartport type. • Macro Parameters-Displays the following fields for three parameters in the macro: - Parameter Name-Name of parameter in macro. - Parameter Value-Current value of parameter in macro. This can be changed here. - Parameter Description-Description of parameter. You can restore the default parameter values by clicking Restore Defaults. Cisco Small Business 200 Series Smart Switch Administration Guide 134