Cisco SR224T Administration Guide - Page 55

System Time Configuring System Time 6 • Local Time-Enter the system time. Time Zone Settings-The local time is used via DHCP or Time Zone offset. • Get time zone from DHCP-Select to enable dynamic configuration of the time zone and the DST from the DHCP server. Whether one or both of these parameters can be configured depends on the information found in the DHCP packet. If this option is enabled, you must also enable DHCP client on the switch. To do this, set the IP Address Type to Dynamic in the IPv4 Interface page. NOTE The DHCP Client supports Option 100 providing dynamic time zone setting. The switch does not support DHCPv6 Client. • Time Zone Offset-Select the difference in hours between Greenwich Mean Time (GMT) and the local time. For example, the Time Zone Offset for Paris is GMT +1, while the Time Zone Offset for New York is GMT - 5. Daylight Savings Settings-Select how DST is defined: • Daylight Savings-Select to enable Daylight Saving Time. • Time Set Offset-Enter the number of minutes offset from GMT ranging from 1-1440. The default is 60. • Daylight Savings Type-Click one of the following: - USA-DST is set according to the dates used in the USA. - European-DST is set according to the dates used by the European Union and other countries that use this standard. - By Dates-DST is set manually, typically for a country other than the USA or a European country. Enter the following parameters: - Recurring-DST occurs on the same date every year. Selecting By Dates allows customization of the start and stop of DST: - From-Day and time that DST starts. - To-Day and time that DST ends. Selecting Recurring allows different customization of the start and stop of DST: • From-Date when DST begins each year. - Day-Day of the week on which DST begins every year. Cisco Small Business 200 Series Smart Switch Administration Guide 56