Cisco SR224T Administration Guide - Page 20

Viewing Statistics Viewing 802.1X EAP Statistics 2 STEP 1 Click Status and Statistics > 802.1x EAP. The 802.1x EAP page is displayed. STEP 2 Select the Interface that is polled for statistics. STEP 3 Select the time period (Refresh Rate) that passes before the EAP statistics are refreshed. The values are displayed for the selected interface. • EAPOL Frames Received-Valid EAPOL frames received on the port. • EAPOL Frames Transmitted-Valid EAPOL frames transmitted by the port. • EAPOL Start Frames Received-EAPOL Start frames received on the port. • EAPOL Logoff Frames Received-EAPOL Logoff frames received on the port. • EAP Response/ID Frames Received-EAP Resp/ID frames received on the port. • EAP Response Frames Received-EAP Response frames received by the port (other than Resp/ID frames). • EAP Request/ID Frames Transmitted-EAP Req/ID frames transmitted by the port. • EAP Request Frames Transmitted-EAP Request frames transmitted by the port. • Invalid EAPOL Frames Received-Unrecognized EAPOL frames received on this port. • EAP Length Error Frames Received-EAPOL frames with an invalid Packet Body Length received on this port. • Last EAPOL Frame Version-Protocol version number attached to the most recently received EAPOL frame. • Last EAPOL Frame Source-Source MAC address attached to the most recently received EAPOL frame. To clear statistics counters: • Click Clear Interface Counters to clear the selected interface's counters. • Click Clear All Interface Counters to clear the counters of all interfaces. Cisco Small Business 200 Series Smart Switch Administration Guide 21