Cisco SR224T Administration Guide - Page 68

8 Configuring Discovery This section provides information for configuring Discovery. It covers the following topics: • Configuring Bonjour Discovery • LLDP and CDP • Configuring LLDP • Configuring CDP Configuring Bonjour Discovery As a Bonjour client, the switch periodically broadcasts Bonjour Discovery protocol packets to directly-connected IP subnet(s), advertising its existence and the services that it provides, for example; HTTP or HTTPS. (Use the Security > TCP/ UDP Services page to enable or disable the switch services.) The switch can be discovered by a network management system or other third-party applications. By default, Bonjour is enabled and runs on the Management VLAN. The Bonjour console automatically detects the device and displays it. Bonjour in Layer 2 System Mode Bonjour Discovery can only be enabled globally, and not on a per-port or perVLAN basis. The switch advertises the services enabled by the administrator. When Bonjour Discovery and IGMP are both enabled, the IP Multicast address of Bonjour is displayed on the Adding IP Multicast Group Addresses page. When Bonjour Discovery is disabled, the switch stops service type advertisements and does not respond to requests for service from network management applications. Cisco Small Business 200 Series Smart Switch Administration Guide 69