Cisco SR224T Administration Guide - Page 171
Configuring Voice VLAN, Displaying Auto Voice VLAN Settings
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
VLAN Management Voice VLAN 12 STEP 5 Click Apply. STEP 6 Configure Smartports as described in the Common Smartport Tasks section. STEP 7 Configure LLDP/CDP as described in the Configuring LLDP and Configuring CDP sections, respectively. STEP 8 Enable the Smartport feature on the relevant ports using the Smartport > Interface Settings page. NOTE Step 7 and Step 8 are optional as they are enabled by default. Workflow2: To configure the Telephony OUI Method STEP 1 Open the VLAN Management > Voice VLAN > Properties page. Set Dynamic Voice VLAN to Enable Telephony OUI. NOTE If the device is currently in Auto Voice VLAN mode, you must disable it before you can enable Telephony OUI. STEP 2 Configure Telephony OUI in the Telephony OUI page. STEP 3 Configure Telephony OUI VLAN membership for ports in the Telephony OUI Interface page. Configuring Voice VLAN This section describes how to configure voice VLAN. It covers the following topics: • Configuring Voice VLAN Properties • Displaying Auto Voice VLAN Settings • Configuring Telephony OUI Cisco Small Business 200 Series Smart Switch Administration Guide 172