Cisco SR224T Administration Guide - Page 160
Configuring VLAN Interface Settings, Interface Settings
View all Cisco SR224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
VLAN Management Configuring VLAN Interface Settings 12 The page enables the creation of either a single VLAN or a range of VLANs. STEP 3 To create a single VLAN, select the VLAN radio button, enter the VLAN ID (VID), and optionally the VLAN Name. To create a range of VLANs, select the Range radio button, and specify the range of VLANs to be created by entering the Starting VID and Ending VID, inclusive. When using the Range function, the maximum number of VLANs you can create at one time is 100. STEP 4 Click Apply to create the VLAN(s). Configuring VLAN Interface Settings The Interface Settings page displays and enables configuration of VLAN-related parameters for all interfaces. To configure the VLAN settings: STEP 1 Click VLAN Management > Interface Settings. The Interface Settings page is displayed. STEP 2 Select an interface type (Port or LAG), and click Go. Ports or LAGs and their VLAN parameters are displayed. STEP 3 To configure a Port or LAG, select it and click Edit. The Edit Interface Setting page is displayed. STEP 4 Enter the values for the following fields: • Interface-Select a Port/LAG. • Interface VLAN Mode-Select the interface mode for the VLAN. The options are: - General-The interface can support all functions as defined in the IEEE 802.1q specification. The interface can be a tagged or untagged member of one or more VLANs. - Access-The interface is an untagged member of a single VLAN. A port configured in this mode is known as an access port. Cisco Small Business 200 Series Smart Switch Administration Guide 161