Cisco SR224T Administration Guide - Page 78

Configuring Discovery Configuring LLDP 8 STEP 3 To associate additional LLDP MED TLV and/or one or more user-defined LLDP MED Network Policies to a port, select it, and click Edit. The Edit LLDP MED Port Settings page opens. STEP 4 Enter the parameters: • Interface-Select the interface to configure. • LLDP MED Status-Enable/disable LLDP MED on this port. • System Log Notification-Select whether the log notification is sent on a per-port basis, when an end station that supports MED has been discovered. • Available Optional TLVs-Select the TLVs that can be published by the switch by moving them to the Selected Optional TLVs list. • Available Network Policies-Select the LLDP MED policies to be published by LLDP by moving them to the Selected Network Policies list. These were created in the LLDP MED Network Policy page. To include one or more userdefined network polices in the advertisement, you must also select Network Policy from the Available Optional TLVs. NOTE The following fields must be entered in hexadecimal characters in the exact data format that is defined in the LLDP-MED standard (ANSI-TIA1057_final_for_publication.pdf): - Location Coordinate-Enter the coordinate location to be published by LLDP. - Location Civic Address-Enter the civic address to be published by LLDP. - Location (ECS) ELIN-Enter the Emergency Call Service (ECS) ELIN location to be published by LLDP. STEP 5 Click Apply. The LLDP MED port settings are written to the Running Configuration file. Cisco Small Business 200 Series Smart Switch Administration Guide 79