Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Installation and Troubleshooti - Page 108
See Using the Resource Configuration Utility, in
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
fan assembly connector release latch cooling fans (3) 3. Slide the replacement assembly into the system, making sure that the electrical connector is fully seated. The cooling fans should begin operating. 4. Replace the computer cover. If an error message indicates an expansion-card problem or if an expansion card seems to perform incorrectly or not at all, the problem could be a faulty connection, a conflict with software or other hardware, or a faulty expansion card. Follow these steps to troubleshoot expansion cards: 1. Start the Resource Configuration Utility (RCU), and verify that all ISA expansion cards have been configured correctly. Save the configuration before exiting the utility. See Chapter 5, "Using the Resource Configuration Utility," in the User's Guide for instructions. 2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 7-20 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide