Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Installation and Troubleshooti - Page 153
²vxssruwhg²iru²
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
the system board, or a SCSI host adapter card installed in one of the expansion slots on the system board, To install a SCSI hard-disk drive in the external drive bay, use the following procedure. 1. Attach the hard-disk drive to the drive carrier. a. With the drive carrier laying flat, place the hard-disk drive right-side up on the carrier with the front of the drive directly behind the carrier handle and the drive connector on the end of the carrier. b. Secure the hard-disk drive to the drive carrier with four screws inserted through the bottom of the carrier. 2. Align the edge of the drive carrier with the notches in the drive bay assembly and slide the carrier into the assembly as shown in Figure 9-7. external drive bay assembly SCSI hard-disk drive in a drive carrier flush-mount screw drive carrier handle drive-carrier locking bar Installing Drives in the External Bays 9-11