Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Installation and Troubleshooti - Page 129
NOTE: If you are installing a PCI expansion card, your system automatically per, forms any required
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
NOTE: If you are installing a PCI expansion card, your system automatically performs any required PCI configuration tasks during the boot routine. 2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 3. Prepare the expansion card for installation, and open the expansion-card access door. See the documentation that came with the expansion card for information on configuring the card, making internal connections, or otherwise customizing the card for the system. 4. Select the expansion slot in which you will install the new expansion card. 5. Open the plastic expansion card clip and remove the expansion-slot filler bracket: a. Press and hold the plastic tab on the outside of the system chassis (see Figure 8-4). b. Press the release tab on the latch inside the system chassis. c. Open the expansion card latch and remove the filler bracket. Installing System Board Options 8-5