Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Installation and Troubleshooti - Page 36
Gulyh, Lqwhuuxsw, Glvnhwwh, Vxsso\´
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Incorrect configuration settings in System Setup program, or no operating system on hard-disk drive Defective system board Faulty diskette, diskette/ tape drive subsystem, or hard-disk drive subsystem No operating system on diskette Additional power supplies are required for current system configuration Check the hard-disk drive configuration settings in the System Setup program. See Chapter 4, "Using the System Setup Program," in the User's Guide for instructions. Replace the system board. See Chapter 11, "Getting Help," for instructions on obtaining technical assistance. Replace the diskette or harddisk drive. If the problem persists, replace the system board. See Chapter 11, "Getting Help," for instructions on obtaining technical assistance. Use a bootable diskette. Reduce amount of memory in system, or upgrade the system by adding a PSPB and additional power supplies. Additional power supplies are required for current system configuration Remove the secondary microprocessor, or upgrade the system by adding a PSPB and additional power supplies. Additional power supplies are required for current system configuration Remove all but one RAID cards in the system, or upgrade the system by adding a PSPB and additional power supplies. No microprocessor or terminator card installed in one of the microprocessor connectors Ensure that each microprocessor connector has either a terminator card or a microprocessor installed. See Chapter 8, "Installing System Board Options," for instructions. NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviations and acronyms list that precedes the Index. 3-6 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide