Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Installation and Troubleshooti - Page 38
User's Guide, User's, Guide
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Incorrect Time or Date settings or defective system battery Check the Time and Date settings. See Chapter 4, "Using the System Setup Program," in the User's Guide for instructions. If the problem persists, replace the battery as instructed in Chapter 8, "Installing System Board Options." Defective system board Replace the system board. See Chapter 11, "Getting Help," for instructions on obtaining technical assistance. Faulty or improperly seated DIMM, or defective system board Remove and reseat the DIMMs. If the problem persists, replace the DIMMs. See "Adding Memory" in Chapter 8 for instructions on installing or removing DIMMs. If the problem still persists, replace the system board. See Chapter 11, "Getting Help," for instructions on obtaining technical assistance. Microprocessor not supported by system Install a correct version of the microprocessor in the specified microprocessor connector. See Chapter 8, "Installing System Board Options," for instructions. Microprocessor not supported by BIOS Upgrade the BIOS. See Chapter 4, "Using the System Setup Program," in the User's Guide for instructions. Faulty diskette or harddisk drive Replace the diskette or harddisk drive. NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviations and acronyms list that precedes the Index. 3-8 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide