Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Installation and Troubleshooti - Page 194

Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide, jumpered, unjumpered

Page 194 highlights

CARDBIOS ISA_CLR PASSWD 333MHZ 350MHZ* 400MHZ* 450MHZ* RSVD1 Reserved (do not change). (default) The ISA configuration settings are retained at system boot. The ISA configuration settings are cleared at next system boot. (If the ISA configuration settings become corrupted to the point where the system won't boot, install the jumper plug and boot the system. Remove the jumper before restoring the ISA configuration information.) (default) The password feature is enabled. The password feature is disabled. Reserved (do not change). The microprocessor's internal speed is 350 MHz. The microprocessor's internal speed is 400 MHz. The microprocessor's internal speed is 450 MHz (when available). Reserved (do not change). RSVD2 Reserved (do not change). * Only one of these jumpers should have a jumper plug installed. jumpered unjumpered NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviations and acronyms list that precedes the Index. B-4 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217

B-4
Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide
7DEOH±%¶´µ±±6\VWHP¶%RDUG±-XPSHU±6HWWLQJV
-XPSHU²²²²²²²²
6HWWLQJ
’HVFULSWLRQ
CARDBIOS
Reserved
(do not change)
.
ISA_CLR
(default)
The ISA configuration settings are retained
at system boot.
The ISA configuration settings are cleared
at next system boot. (If the ISA configura-
tion settings become corrupted to the
point where the system won’t boot, install
the jumper plug and boot the system.
Remove the jumper before restoring the
ISA configuration information.)
PASSWD
(default)
The password feature is enabled.
The password feature is disabled.
333MHZ
Reserved
(do not change)
.
350MHZ
*
The microprocessor’s internal speed is
350 MHz.
400MHZ
*
The microprocessor’s internal speed is
400 MHz.
450MHZ
*
The microprocessor’s internal speed is
450 MHz (when available).
RSVD1
Reserved
(do not change)
.
RSVD2
Reserved
(do not change)
.
*
Only one of these jumpers should have a jumper plug installed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviations and
acronyms list that precedes the Index.
jumpered
unjumpered