Epson FX-880 User Manual - Page 116
Changing Default Settings, International character set for Italic table
View all Epson FX-880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
International character set for Italic table You can select among several international character sets for the Italic character table. Each character set contains eight characters that vary depending on the country or language, so you can customize the Italic table to suit your printing needs. See Appendix C for character samples. Changing default settings Follow the steps below to enter the default-setting mode and change the printer's default settings. Note: o To print the language selection and default-setting mode 5 instructions, you need three sheets of A4 or letter size single-sheet paper or three pages of continuous paper that is at least 279 mm (11 inches) long and 210 mm (8.3 inches) wide. See Chapter 3 for instructions on loading continuous paper, or Chapter 4 for instructions on loading single sheets. o If you use single sheets, you need to load a new sheet of paper each time the printer ejects a printed sheet from the paper guide. 1. Make sure paper is loaded and the printer is turned off. c Caution: Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise, you may damage the printer. 2. Using the tables on pages 5-4 and 5-8, determine whether the setting you want to change is in default-setting mode 1 or 2. Changing Printer Settings From the Printer's Control Panel 5-9