Epson FX-880 User Manual - Page 99
Advancing Paper to the Tear-off Position Automatically, Adjusting the Tear-Off Position, setting mode
View all Epson FX-880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Advancing paper to the tear-off position automatically To automatically advance your printed documents to the tear-off position, turn on the auto tear-off mode and select the appropriate page length for continuous paper in the default setting mode. When auto tear-off is on, the printer automatically advances the paper to the tear-off position whenever it receives a full page of data or a form feed command followed by no more data. To enter the defaultsetting mode, see "Making Default Settings" on page 5-3. Adjusting the tear-off position If your paper's perforation is not aligned with the tear-off edge, you can use the micro adjust feature to move the perforation to the tear-off position. Follow the steps below. c Caution: Never use the knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position. Note: Your tear-off position setting remains in effect until you change it, even if you turn off the printer. 3-38 Printing on Continuous Paper