Epson FX-880 User Manual - Page 4

Control Panel Buttons and Lights Font lights Indicate which font is selected. To select a font, see Chapter 5. Micro Adjust Using the micro adjust feature, you can press the D and U buttons to adjust the top-of-form or tear-off position. See Chapter 3. Paper Out light • On when no paper is loaded in the selected paper source or paper is not loaded correctly. • Flashes when paper has not been fully ejected or a paper jam has occurred. Operate button Turns the printer on and off. The printer is off when the top of this button is even with the button protectors. Tear Off/Bin button • Feeds continuous paper forward to the tear-off position. • Feeds continuous paper backward from the tear-off position to the top-of-form position. • Selects a cut-sheet feeder bin when the cut-sheet feeder is installed. LF/FF button • Feeds paper line by line. • Ejects a single sheet or advances continuous paper to the next top-of-form position when held down. Tear Off/Bin light • Flashes when continuous paper is in the tear-off position. • On when bin 1 of the optional cut-sheet feeder is selected. • Off when bin 2 of the optional cut-sheet feeder is selected. Load/Eject button Pause button • Loads a single sheet • Stops printing of paper. • Ejects a single sheet temporarily, and resumes printing of paper if a sheet is when pressed again. loaded. • When held down for • Loads continuous three seconds, paper from the enters the micro standby position. • Feeds continuous adjust mode. When pressed again, exits paper backward to the micro adjust the standby position. mode. Pause light • On when the printer is paused. • Flashes when the printer is in the micro adjust mode.