Epson FX-880 User Manual - Page 174
Using a Serial Interface Card (C82305] or 82306] ), Selecting a Baud Rate, Handshake Timing
View all Epson FX-880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
A Using a Serial Interface Card (C82305] or 82306] ) To use a serial interface card (C82305] or C82306] ), see the sections below regarding baud rate, handshake timing, and error handling. For all other data transfer conventions, such as word structure and communications protocol, see your interface card manual. Selecting a baud rate You can select from the following baud rates: 300, 600, 1200, 1800, 2400, 4800, 9600, and 19200 bps (bits per second). To set the baud rate, see the bit-rate selection table in your interface card manual. Handshake timing When the unused area for data in the input buffer drops to 256 bytes, the printer outputs an X-OFF code or sets the DTR flag to 1 (MARK) to indicate that it cannot receive data. When the unused area increases to 512 bytes, the printer outputs an X-ON code or sets the DTR flag to 0 (SPACE) to indicate that it is ready to receive data. Error handling When the printer detects a parity error, it prints an asterisk (] ). The printer ignores all other errors, including framing and overrun errors. Enhancing Your Printer With Options A-27