Epson FX-880 User Manual - Page 134
The printer does not fully eject a single sheet.
View all Epson FX-880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
The paper on the paper guide is positioned too far to the left or right for the printer to detect that it is there. Move the paper (and the edge guides) a little to the left or right. Single-sheet paper is not loaded properly. See Chapter 4 for instructions on loading single-sheet paper. The paper thickness lever is not set correctly. Set the paper thickness lever to match the thickness of your paper. See "Setting the Paper Thickness Lever" in Chapter 3. Paper is creased, old, too thin, See the paper specifications in or too thick. Appendix C and use new, clean sheets of paper. The printer does not fully eject a single sheet. Cause What to do Paper is too long. Press the Load/Eject button to eject the sheet. Make sure the page length of your paper is within the range specified for single-sheet paper in Appendix C. Also check and adjust the 7 paper size setting in your application or printer driver. Troubleshooting The paper does not feed properly with the optional cut-sheet feeder. Cause What to do The cut-sheet feeder is not installed properly. Reinstall it as described in Appendix A. Troubleshooting 7-5