Epson Stylus Pro 4800 Portrait Edition Printer Guide - Page 121

Maintaining and Transporting the Printer | 121 10. Close the top cover when you see a message prompting you to do so. The cutter moves to the home position. Replacing the Maintenance Tank The maintenance tank stores ink that gets flushed from the system during manual and automatic print head cleaning. When the tank is almost full, the message MNT TK NEAR FULL appears on the LCD panel. When the tank is completely full, the printer stops working and MNT TNK FULL appears on the LCD. You can check how much space remains in the maintenance tank by viewing its indicator on the control panel, shown below. You can also check its status using the SelecType menu (see page 103) or by printing a nozzle check sheet (see page 102). Maintenance tank indicator (showing a new tank) Note: You can purchase replacement items for your printer from an authorized Epson reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). In the U.S., you can also purchase online at www.epsonstore.com. (U.S. sales only). In Canada, you can also purchase at www.epson.ca or 800-807-7766. Replacement tanks are available from Epson (part number C12C890191). Follow these steps to replace the tank: 1. Make sure the printer is not printing or performing any other operations (READY or PAPER OUT should appear on the control panel). 2. If you are using 220 ml ink cartridges, remove the four cartridges from the right ink compartment, then close the compartment cover. 5-121