Epson Stylus Pro 4800 Portrait Edition Printer Guide - Page 134
Service Req., Set Ink Crtg, Set Paper, Lever, Top Cover, Unable To, Print, Wrong Ink, Wrong Paper
View all Epson Stylus Pro 4800 Portrait Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
134 | Solving Problems Message SERVICE REQ. Light All lights flashing Explanation The print head is locked. An error has occurred. Response Pull out the green tab to unlock the print head. See page 18. Note the error number, then turn the printer off and back on. If the message remains, contact Epson as described on page 10. SET INK CRTG SET PAPER LEVER TOP COVER OPEN UNABLE TO PRINT WRONG INK CRTG WRONG PAPER SIZE - Paper light on - Ink cartridge chip error. Remove and reinstall the ink cartridge. If the message remains, replace the cartridge. Paper lever was released during the printing process or another operation. Pull the lever all the way forward, to the secured position. Start printing again from the beginning for best results. Top cover is open. Close the top cover. - B Ink light on You tried to print while Press the Pause button to exit the an error condition was SelecType menu system. If the message present. appears again, clear the error before you print. You tried to install the wrong ink cartridge. If you are installing ink cartridges for the first time, you must install the cartridges that came with your printer. Paper light flashing Loaded paper does not match the image size. If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges designed for your printer. Other cartridges will not work. Make sure the size you selected in the printer driver matches the loaded paper size. Load the correct size paper if necessary. 6-134