Epson Stylus Pro 4800 Portrait Edition Printer Guide - Page 73

Printing with Epson Drivers for Macintosh | 73 Borderless Printing For true borderless printing on roll paper, you can select either Auto Expand or Retain Size and create a custom paper size, as described above. Your image may be clipped on the left and right edges, but you can minimize clipping by sizing your image according to the page width and by adjusting the length. For either setting, you should add 0.1 inch to the length of your custom size. The Auto Expand setting provides the best solution for borderless printing with minimal image clipping. Using this setting, you can create a custom paper width equal to the width of the roll media. If you use the Retain Size setting, you should create a custom paper width slightly wider than the actual width of the media. The following table shows recommended image widths (in inches) for borderless printing using either the Auto Expand or Retain Size setting: Recommended image widths (in inches) for borderless printing Roll paper width Image width Image width Custom Paper Size (with Auto Expand) (with Retain Size) (for Retain Size only) 8.3 8.06 8.35 8.3 10 9.7075 10.34 10.23 12* 11.8 12.34 12.23 14* 13.8 14.34 14.23 16 15.8 16.34 16.23 17 16.8 17.34 17.23 * Non-Epson roll media widths Make sure you set the margins to zero when printing a custom page size for borderless printing. 3-73