Epson Stylus Pro 4800 Portrait Edition Printer Guide - Page 132
Message, Light, Explanation, Response, LOWER L or R
View all Epson Stylus Pro 4800 Portrait Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
132 | Solving Problems Message INVALID INK CRTG Light B Ink light on Explanation You tried to install the wrong ink cartridge. Response If you are installing ink cartridges for the first time, you must install the cartridges that came with your printer. If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges designed for your printer. Other cartridges will not work. LOAD PAPER Paper light Paper lever is in the After you finish loading paper, pull the paper on released position while lever all the way forward, to the secured loading paper. position. LOAD ROLL PAPER LOAD SHEET PAPER IN P. TRAY Paper light on Paper source setting in printer driver is different from control panel. Make sure the right paper is loaded and the paper source setting is the same on the control panel and printer driver. LOWER INK - LEVERS LOWER L (or R) INK LVR One or both ink levers Pull the lever or levers down to lock the ink are raised. cartridges. MNT REQ. - A printer part will need Note the code number and contact Epson as to be replaced soon. described on page 10. MNT TK NEAR - FULL The maintenance tank Make sure you have a replacement is almost full. maintenance tank. See page 121. MNT TNK FULL B Ink light on The maintenance tank Replace the maintenance tank. See page 121 is full. for instructions. NO BORDERLESS - WITH THIS SIZE RELOAD PAPER Note: These messages alternate. Borderless setting selected for A2-size sheets (11.7 × 16.5) Change the setting in the printer driver, or load different-size paper. NO INK CRTG B Ink light on Ink cartridge(s) not installed or ink lever raised. Install ink cartridges (page 109) or lower the ink lever. NO MNT TNK - The maintenance tank Make sure the maintenance tank is fully is not installed. inserted. See page 121 for instructions. NOT STRAIGHT Paper light Cut sheet paper is not Load the paper correctly. RELOAD on loaded straight. 6-132