HP 620Lx HP 620LX/660LX PalmTop - (English) User Guide - Page 157

This indicates that the international access code should be dialed and then after a pause the country code, area code and local number. i.e. "001,EFG" or "9,001,EFG". When you have finished tap OK to leave the dialing patterns and communications windows. Example of dialing patterns are listed below: Country Singapore Malaysia US France1 France2 UK Local G G G 0G 0FG 0FG Long Distance G 0FG 1FG 0G 0FG 0FG International 001, EFG 001, EFG 011, EFG 00, EFG 00, EFG 00, EFG US: If you need to dial a phone number that is in your area code but still requires a "1" and the area code (long distance) to dial it, you need check the "Force Long Distance" box when you "Make a New Connection." To change a Dial-Up Connection that is already made: - Tap Start and Programs - Double-tap Communications and Remote Networking - Tap to highlight the connection to be changed. - Tap File, then Properties. - Tap Force Long Distance box. France1: Use this dialing pattern if you have put in the entire telephone number minus the leading 0 in the telephone number field and left the area code field blank. France2: Use this dialing pattern if you have put the one-digit area code (without the leading 0) in the area code field and the 8-digit number in the phone number field. To set up manual dialing: If you need to use a dialing string which has more than 32 characters (e.g. when using a calling card), or if the dialing string contains special characters and commands, you will need to dial manually to make the modem connection: 1. Tap Start, then tap Programs, and then double-tap the Communications folder. 2. Double-tap the Remote Networking folder, then tap to highlight the connection which you want to set up for manual dialing. 3. Tap File, then tap the Properties button on the toolbar. WorkingwithHPPrPe-aIlnmsttaolplePdCAUppsleicraGtuioidnes - 147