HP Latex 110 Users Guide - Page 114
Front panel recommends reseating or replacing a printhead, Replace a printhead, CAUTION
View all HP Latex 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Front panel recommends reseating or replacing a printhead 1. Remove the printhead and check that it is free from physical damage and from ink stains on the electrical connections. 2. If necessary, clean the electrical connections between the printhead and the carriage. See Clean the electrical connections on a printhead on page 115. 3. Reinsert the printhead into the carriage and check the front panel message. 4. If the problem persists, insert a new printhead. Replace a printhead Remove a printhead 1. On the printer's front panel, press , then Replace printheads. 2. The carriage moves to the removal position. CAUTION: If the carriage remains in the removal position for more than 3 minutes without inserting or removing any printheads, it will attempt to return back to its home position to the right. CAUTION: Observe precautions when handling printheads because they are ESD-sensitive devices. Avoid touching pins, leads, or circuitry. 3. When the carriage has stopped moving, the front panel prompts you to open the printer window. 108 Chapter 7 Hardware maintenance ENWW