HP Latex 110 Users Guide - Page 18
Change the loudspeaker volume, Turn audio alerts on or off, Change the front panel display brightness
View all HP Latex 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Change the loudspeaker volume To change the volume of the printer's loudspeaker, go to the front panel and press panel options > Speaker volume, and select Off, Low, or High. , then Setup > Front Turn audio alerts on or off To turn the printer's audio alerts on or off, go to the front panel and press , then Setup > Front panel options > Enable audio alert or Disable audio alert. By default, audio alerts are enabled. Change the front panel display brightness To change the brightness of the front-panel display, press , then Setup > Front panel options > Display brightness, then select a value by moving the scroll bar. Press OK to save the value. Change the units of measurement To change the units of measurement that appear on the front panel, press options > Unit selection, then English or Metric. , then Setup > Front panel The units of measurement can also be changed in the Embedded Web Server. See Access the Embedded Web Server on page 19. Restore factory settings To restore the printer settings to their original values as set in the factory, go to the front panel and press , then Setup > Resets > Restore factory settings. This option restores all of the printer settings except the Gigabit Ethernet settings and substrate presets. Check printer status The front panel and the Embedded Web Server both display the status of the printer, the loaded substrate, and the ink system. Check the status of the ink cartridges You can see the ink levels in your ink cartridges by pressing on the front panel's home screen. For more details about any particular ink cartridge, press the rectangle representing that cartridge. The following information is shown. 12 Chapter 1 Introduction ENWW