HP Latex 110 Users Guide - Page 123
CAUTION, force along the entire depth of the flex connector
View all HP Latex 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
6. Insert the carriage interconnect wiper into the printhead slot at the back. Wipe the electrical contacts by inserting the tool between the electrical connections at the back of the slot and the steel spring, with the sponge facing away from you and towards the electrical contacts. Try to avoid picking up any ink deposit that may have accumulated on the bottom surface of the slot. CAUTION: If the carriage remains in the central part of the printer for more than 7 minutes, it attempts to return to its home position to the right. 7. Rub the sponge against the contacts with a light force along the entire depth of the flex connector, inserting the wiper as far as allowed by the mechanical stop on the tool. 8. Take special care to clean all contacts thoroughly, including the ones at the lowest point of the connector. ENWW Clean the electrical connections on a printhead 117