HP Latex 110 Users Guide - Page 49
you wish. The stop slides along the spindle to hold rolls of different widths.
View all HP Latex 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2. Lift the spindle lock lever to disengage the spindle. 3. Remove the spindle from the printer. CAUTION: Do not insert your fingers into the spindle supports. The spindle has a stop at each end to keep the roll in position. Remove the blue stop at the left end to mount a new roll (the stop at the other end of a 3 in (76 mm) diameter spindle can also be removed, if you wish). The stop slides along the spindle to hold rolls of different widths. NOTE: If you have a 2 in (51 mm) spindle, you can use the 3-in adaptor. 4. Unlock the blue stop. ENWW Load a roll onto the spindle 43
2.
Lift the spindle lock lever to disengage the spindle.
3.
Remove the spindle from the printer.
CAUTION:
Do not insert your fingers into the spindle supports.
The spindle has a stop at each end to keep the roll in position. Remove the blue stop at the left end to
mount a new roll (the stop at the other end of a 3 in (76 mm) diameter spindle can also be removed, if
you wish). The stop slides along the spindle to hold rolls of different widths.
NOTE:
If you have a 2 in (51 mm) spindle, you can use the 3-in adaptor.
4.
Unlock the blue stop.
ENWW
Load a roll onto the spindle
43